BOSS Performance Suspension system for '95.5-'04 Tacoma
Designed for the best overall ride comfort and performance in mind, this complete lift kit is the best lift on the market.
- ToyTec BOSS Front Coil Overs with Remote Reservoir and Adjusters
- ToyTec’s latest BOSS front coilover comes with a remote reservoir and valve adjuster knobs allowing the ultimate front suspension tuning ability. This improves overall handling and performance.
- Designed and tuned for the 1st gen Tacoma and 3rd gen 4Runner
- Coilovers have a heim style lower eyelet for increased performance and side specific coilovers designed for proper mounting.
- The threaded Clear-Blue Chromate zinc plated steel shock body is adjustable from 0-3” of front lift height and can be fine tuned to level your truck side to side and front to back.
- Charged to 200 psi Nitrogen charge, each shock is dyno’d before it is shipped.
- Upper mounts and adjustment rings are machined from 6061-T6 Billet aluminum and are then anodized black to prevent corrosion.
- TIG welded spanner wrench included for ride height adjustment.
- Reservoir mounting hardware is included.
- We only use Eibach springs for our coilovers which means you have the best name and quality in the business supporting your vehicle.
- Comes fully assembled and ready to bolt on. Preset for approximately 2.5" to 3" of lift.
- Includes Front Differential drop kit
Choose coil spring rates below.
- 550 lb/in Silver Eibach Coils- great for stock front weight.
- 600 lb/in Eibach (Red or Silver) - will handle the extra weight of a front bumper and winch.
- TAC-DR Front Diff Drop kit - For 4wd models - When installing a lift on the front of a 4wd 4Runner, the angles of the front CV axles will increase the higher you lift it. At 3 inches of lift, the CV joints will operate at considerable angle which will increase wear on the CV joints and the rubber boots. The front differential drop kit will reduce the angle placed on the CV axles thereby reducing wear on those components.
- Toytec 2” lift rear Add-A-Leafs. This long style AAL offers a great ride and has anti-friction pads already installed. Comes with (2) new center bolts.
- Toytec Rear Boss Shocks -TAC9604R - Rear BOSS 2.0 Extended Length Shocks.
- BPV-K -Brake proportioning valve extension bracket is needed for proper brake operation after lifting. Aluminum Bracket and Grade 8 zinc plated hardware included
**It is strongly recommended that you add upper control arms in order to ensure proper alignment.**
Add Upper Control Arms to complete your kit:
- Total Chaos Uniball Upper Control arms - 96500 - Maximize your wheel travel and increase your strength while also correcting alignment angles.
- SPC Adjustable Upper Control Arms - 25460 - The most adjustable UCA on the market. Correct your alignment angles. Also great for adjusting for tire clearance.
**Will not fit 5-lug Tacoma